blade closed, actually started at 25%, and backed it down until it was responsive, that with a .100 pill. Then rechecked the leakdown and it came out 18% i then set the blade to .008, it idles at about 1200 rpm with a 106 CL cam. That was the last time i checked it and i have turned it a couple or more flats during the tuning process. In reality i'm not for sure what it's set on right now, it could be higher. I mess with a lot of hilborn stacks injection and i find them to like about 22% i set those bldes at .002, and a few hats, strange but they like about 30% leakdown, don't know why unless it's because the butterfly are so far up from the nozzles.
Zip.