Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   General Discussion (https://www.racingjunk.com/forums/forumdisplay.php?f=7)
-   -   What is the best way to cut lexan? (https://www.racingjunk.com/forums/showthread.php?t=28147)

bowtie4542001 05-27-2010 12:34 PM
Thanks for all the input guys.

oldandtired 05-27-2010 01:33 PM
Originally Posted by DrivingMissDD
Keep your blade speed low, as a higher speed will melt the polycarbonate and clog the blade.
x2 If you begin seeing build up on the blade, stop, let it cool and remove the melted stuff. You can also have "your better half" cool the blade with a squirter with water, especially when cutting in the turns.
Dave


All times are GMT -8. The time now is 12:06 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page