en-us Thu, 14 May 2026 08:49:04 GMT 184785838 https://media.racingjunk.com/rear-ends/184785838/brand-new-strange-pro-series-ford-9-nodular-iron-case.html I have a brand new - never used or mounted in any way strange pro-series steel 9" bare case. it's part number N-1905. here are the factory spec's For Heavy / High Horsepower Vehicles Extremely rigid design minimizes deflection Pro Iron Case • 8-10% stronger material than stock nodular iron • Additional mass in all critical areas • Chrome moly main caps • Solid adjuster nuts • Designed & machined by Strange • Cast in the USA3.062″ Bore Size…

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Sun, 10 May 2026 17:37:35 GMT 182834579 https://media.racingjunk.com/rear-ends/182834579/10bolt-posi-ladar-bar.html Older 10bolt posi(out of a 80'snova(built with 488posi(richmond gears(had 500hp 56chevy I put it in,then I put a 840hpengine,changed the rear to a strange rear set up,maybe 1000miles on rear

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Mon, 04 May 2026 07:45:11 GMT 184784227 https://media.racingjunk.com/rear-ends/184784227/2018-camaro-rear-end.html It’s out of a 2018 Camaro that had an LT four supercharged and a 10 speed in it make an offer. I do not know what it’s worth it’s Godzilla one Brakes and it’s got some electronic computer with it.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Wed, 29 Apr 2026 14:39:53 GMT 184784063 https://media.racingjunk.com/rear-ends/184784063/mark-williams-9inch-center-section-529-pro-gear.html Mark Williams 9 inch center section 529 pro gears set up for 1350 u joints 40 spline spool

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Tue, 28 Apr 2026 22:34:34 GMT 182739944 https://media.racingjunk.com/rear-ends/182739944/complete-4link-art-morrison-strange.html New complete link with all related parts. Also have 67 chevelle rolling chassis

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Thu, 23 Apr 2026 07:45:10 GMT 184781634 https://media.racingjunk.com/rear-ends/184781634/tom-s-thirdmember-4.11-9.5-2-500.html Tom's Thirdmember 9.5" 4.11 Ratio in great condition/gear/parts like new. This has been a spare of ours and no longer needed.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Tue, 14 Apr 2026 17:38:33 GMT 184780924 https://media.racingjunk.com/rear-ends/184780924/mark-williams-9.5-center-section-3.25.html Brand new Mark Williams 9.5” Extreme Third Member • 40 spline • 3.25 pro gear • 12-point hall effect sensor ring • 2nd gen U-bolt kit

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Sat, 11 Apr 2026 10:53:27 GMT 184704978 https://media.racingjunk.com/rear-ends/184704978/complete-rear-housing.html Strange Engineering Aluminum Rear Housing 33" Width Strange Engineering 9.5' Rear Center Section With 430 Ratio Pro Gears, Large Pinion And 1350 Yoke Strange Engineering 40 Spline Pro Axles, Rifle Drilled Strange Engineering Steel Disc Brakes Steel 4 Link Mounts With 1/2" Bolt Holes, 15 3/4" Center On Brackets 10 to 15 Runs On Rear Since New In 2022 Call Steve 410-360-4020

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Wed, 08 Apr 2026 07:45:10 GMT 184780506 https://media.racingjunk.com/rear-ends/184780506/ford-8.8-built-rear-end-3.73-spool-31-spline-bolt-in.html Ford 8.8 Mustang Stock Length Easy Bolt In 54" housing end to end, 59" wheel flange to flange, 5 lug conversion or drag car. Welded tubes, braced, 3.73, 31 spline spool and axles, c-clip eliminators, 94' V6 brakes, street beast control arms, stainless brake lines, strange 10 way struts, strut tower bar. $1,300 including shipping

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Tue, 07 Apr 2026 23:12:53 GMT 184779475 https://media.racingjunk.com/rear-ends/184779475/strange-9-locker.html Strange Engineering Cast Iron Case 4:10 35 spline Detroit Locker. New never installed cost $1,700 Asking $1,200

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Wed, 01 Apr 2026 18:58:49 GMT 184778720 https://media.racingjunk.com/rear-ends/184778720/strange-9-floater-rear-end.html Strange 9” Floater Rear End – Mark Williams center, 4.88 gears (rebuilt), 40-spline Strange axles & brakes. Ready to run.

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Mon, 30 Mar 2026 09:08:12 GMT 184778704 https://media.racingjunk.com/rear-ends/184778704/built-foxbody-8.8-rear-end-35-spline-spool-braced-dis.html For sale is an 8.8 rear end out of a fox mustang. It's narrowed, braced and has 9" Torino style ends on it. Specs below Housing width 45". Width with axles and brake rotors 50.5" Team z brace kit forward and lower. Tubes welded Moser 35 spline spool Moser 35 spline axles Motive 3.90 gear (new with no passes) Spherical bearings in upper ears Coil over brackets 1350 chromoly strange yoke Driveshaft speed sensor motion raceworks Trz upper control arms Trz lower control arm…

]]> Chassis/Suspension/Brakes/Driveline: Rear Ends Mon, 30 Mar 2026 02:39:44 GMT