en-us Thu, 04 Jun 2026 06:26:20 GMT 184778673 https://media.racingjunk.com/heads/184778673/brodix-390x-cnc-ported-heads-.html BRODIX 390X CNC Ported Raised Oval Port Heads Flows 480 CFMs at 900 Lift 119cc Combustion Chamber 2.375 Intake 1.850 Ex Severe Duty Manley or Brodix On Sale starting at $4295.00 per pair bare

]]> Engine Parts: Heads Wed, 03 Jun 2026 07:50:03 GMT 184778670 https://media.racingjunk.com/heads/184778670/brodix-335-oval-port-3xtra-castings.html Big Sale!! Only $3295! Reg $3995 2-Complete 24 degree 335 Oval Port using special 3Xtra casting Complete 2 Heads 2.300x1.880 Severe Duty Valves Roller Springs Manley Retainers

]]> Engine Parts: Heads Wed, 03 Jun 2026 07:50:03 GMT 184778358 https://media.racingjunk.com/heads/184778358/pontiac-drce2-4.9-pro-stock-heads.html These where 25K in 2000 Brodix Pontiac 4.9 Heads welded and rolled to 12 degree fresh valve job fresh clean up mill, Titanium Valves like new Titanium Retainers Triple PSI Springs, I also have the Rocker Stands and Jesel Rockers for 4995.00 I have a matching sheet metal Intake for 1200 and a set of 2,0 Bob Book Dominators for 2200.00 Contact Mike 513-607-2592 mikejw5@cs.com

]]> Engine Parts: Heads Wed, 03 Jun 2026 07:50:03 GMT 184778239 https://media.racingjunk.com/heads/184778239/drce2-heads-4.9bs.html 2-GM DRCE2 Pro-Stock Racing Heads By Steve Schmidt 25K new in around 2005 Heads excellent condition Bronze seats 10 degree Intake valve angle these are EX Bob Book AED Heads I have Bare heads I have the Titanium Valves PSI triple roller Spring and Retainers I have Stands and Jesel Rockers and matching Sheet Metal Intake and a set of Matching Bob Book Pro-Stock Dominators, asking 3500 Bare 4500 with like new Titanium Valves 5000 complete with springs and Retainers locks and cups 6500 with Stands…

]]> Engine Parts: Heads Wed, 03 Jun 2026 07:50:03 GMT 184797850 https://media.racingjunk.com/heads/184797850/429-dooe-r-scj-heads-.html For sale: 429 DOOE-R SCJ heads with Edelbrock Victor intake and Holley carburetor. Heads have been rebuilt with stainless steel valves and springs set up for an aggressive solid-lift flat tappet cam. Intake ports are untouched, and the exhaust ports have had minor cleanup work. The project these were intended for has been sold, so no longer needed. Price: $1500. You’ll pay for shipping if you want that. Serious inquiries only. Thank you.

]]> Engine Parts: Heads Tue, 02 Jun 2026 23:08:53 GMT 184797780 https://media.racingjunk.com/heads/184797780/solid-big-duke-pb1803-cylinder-heads.html Very nice set of Solid Cast Brodix Big Duke Heads, Super hard to find, These are the PB1803 casting CNC ported by KC and set on 16deg valve angle, Come assembled with titanium valves and hardware, and a Set of T&D rockers. im missing the stands, are available to be purchased from T&D. NEVER WELDED CRACKED OR REPAIRED! Have around then 20 runs on them • 416 cc oval Intake Ports • New 16° Valve Angle • Flows 515 cfm • 100% CNC Ported • Nitrous Friendly •…

]]> Engine Parts: Heads Tue, 02 Jun 2026 01:30:58 GMT 184797778 https://media.racingjunk.com/heads/184797778/gpi-gen-v-lt1-heads-cam.html Gpi gen v Lt1 heads, cnc ported, milled .040, btr premium spring kit setup by gpi. Gpi track attack Lt1 camshaft. Specs are in pictures. Build changed paths while these heads were gone being ported. Save some time and buy these. Will ship

]]> Engine Parts: Heads Tue, 02 Jun 2026 01:25:15 GMT 184797773 https://media.racingjunk.com/heads/184797773/bbf-460-interceptor-heads.html Set of 460 pi heads with CJ valves 2.25 intake 1.74 exhaust set up for .600 lift hyd flat tappet cam

]]> Engine Parts: Heads Tue, 02 Jun 2026 01:12:02 GMT 184797770 https://media.racingjunk.com/heads/184797770/-db-dc-heads.html Fresh set of db/dc 9thread heads. New seals, valve job, and resurface ready to bolt on and run

]]> Engine Parts: Heads Tue, 02 Jun 2026 01:04:13 GMT 184797758 https://media.racingjunk.com/heads/184797758/afr-220-ti-inconel-vavles-spread-port-heads.html AFR air flow research 220cc CNC small block Chevy heads, pre eliminator, ready to install -spread port exhaust, very heavy duty casting, great for power adders -O-ringed for extreme pressure, can remove rings and run composite gasket -ready to bolt on, refreshed with valve job -approx 75cc chambers -solid roller springs -2.08” titanium intake valves -1.6" Inconel exhaust valves (super heat resistant) -Valves alone cost more than I 'm asking for the heads -Mechanical roller…

]]> Engine Parts: Heads Mon, 01 Jun 2026 23:46:34 GMT 184797746 https://media.racingjunk.com/heads/184797746/jon-kaase-p51-cylinder-heads.html Jon Kaase P51 Cylinder Heads for sale with approximately 15 runs. These heads are fresh out of the machine shop and recently updated with a new spring package, Trick Titanium retainers, Comp cups and retainers, and PAC-1224 springs set at .300 on the seat. They feature an R50 machined surface, and the spring package is capable of supporting up to an .800 lift cam. Heads are in great shape and ready for the next setup. Selling because I’m upgrading and going in a different direction. $2,000…

]]> Engine Parts: Heads Mon, 01 Jun 2026 20:24:12 GMT 184797724 https://media.racingjunk.com/heads/184797724/new-trick-flow-a460-cylinder-heads-set.html Brand new Trick Flow A460 cylinder heads set, never used and ready for a serious high-performance big block Ford build. These heads feature 340cc intake runners, 2.35” intake valves, 1.88” exhaust valves, and 83cc combustion chambers, with the durable Fast As Cast® casting finish. Equipped with titanium retainers for added performance and durability. Part # TFS-5441T802-M83. Excellent choice for street/strip or race applications. Message me if you want it thank you.

]]> Engine Parts: Heads Mon, 01 Jun 2026 16:07:40 GMT