en-us Thu, 23 Apr 2026 09:01:04 GMT 184761552 https://media.racingjunk.com/engine-machining/184761552/amc-head-and-block-resurfacing-machine.html This AMC Head and Block Surfacer is in good working condition and ready to go to work. Cuts with stone segments and coolant. This is a Large Machine that can cut Cummins, Cat, Detroit Blocks and Heads. Customer will need to arrange to pick up from Columbus, GA. We can have riggers put this machine on a flat bed trailer for $6000.00 Call Monty for more Details 404-660-8271

]]> Tools and Shop Equipment: Engine Machining Wed, 22 Apr 2026 07:50:03 GMT 184782798 https://media.racingjunk.com/engine-machining/184782798/magnaflux-dra-60.html Specifications Handles parts up to 60" long. Magnetizing and demagnatizing coil. Comes with a 20" coil. Air operated headstock. Crank operated tailstock. Y-shaper tank holds inspection medium. Magnetic particles are kept in a proper solution by pump and agitation tube. Pump also supplies bath to hand nozzle. Low-voltage, high-ampereage power pack. Five point power pack current control. Contact panel with three eitherend cable connectors. Magnetizing-demagnetizing control station.…

]]> Tools and Shop Equipment: Engine Machining Tue, 21 Apr 2026 19:57:41 GMT 184634710 https://media.racingjunk.com/hand-tools/184634710/premium-clamptite-tool-kit.html Premium ClampTite Tool Kit Stainless Steel w/Bronze Nut with 2 rolls of Stainless Steel wire (304 .32" and .41") This tool is machined stainless steel with a one piece body and bronze nut. The tool was designed with the detailed craftsman who needs a long lasting tool able to hold up to extremely tough wire while clamping, binding and pulling the wire until the job is complete

]]> Tools and Shop Equipment: Hand tools Tue, 21 Apr 2026 07:50:04 GMT 184774092 https://media.racingjunk.com/engine-machining/184774092/berco-300-crankshaft-grinder.html Large Berco 300 Crankshaft Grinder. Everything is working as it should. Very good condition.

]]> Tools and Shop Equipment: Engine Machining Tue, 21 Apr 2026 07:50:03 GMT 184754500 https://media.racingjunk.com/engine-machining/184754500/sunnen-vr-7000-centerless-valve-refacer.html Good working Sunnen Valve Grinding Machine ready to go to work. Call for more details. (Monty 404-660-8271)

]]> Tools and Shop Equipment: Engine Machining Tue, 21 Apr 2026 07:50:03 GMT 184765482 https://media.racingjunk.com/engine-machining/184765482/sunnen-dcb-2000-crankshaft-balancer.html Sunnen DCB - 2000 Engine Balancer with Computer. Upgraded Recently for complete computer operation. V-8 bob weights, Scales, Rod Weighing Device. Complete with Balancing Arbor. Many Extras. This machine is in excellent condition and ready to make money. Call Monty for more details 404-660-8271

]]> Tools and Shop Equipment: Engine Machining Mon, 20 Apr 2026 07:50:03 GMT 184759275 https://media.racingjunk.com/welders-plasma-cutters/184759275/miller-syncrowave-351-tig-welder-nt-sunnen-rottler.html Miller Tig Welder with Coolant in good working order. For more information call Monty (404-660-8271)

]]> Tools and Shop Equipment: Welders & Plasma Cutters Mon, 20 Apr 2026 07:50:03 GMT 184643210 https://media.racingjunk.com/engine-machining/184643210/pressure-tester.html Complete set of tooling and will do up to 48” heads

]]> Tools and Shop Equipment: Engine Machining Mon, 20 Apr 2026 07:50:03 GMT 184782171 https://media.racingjunk.com/engine-machining/184782171/axe-air-assist-cylinder-hone-ki-pk447s-portable-boring-bar.html This is a used Axe CH-A1 Air Assist Cylinder Hone Machine that is in great shape. Came out of a one man shop. Comes with a Kansas Instruments / Peterson PK 447S Portable Boring Bar. The boring bar comes with the tool kit and paws. The boring bar also has a rolling stand. I will separate the two $4800 for the hone and $4800 for the portable boring bar. $8800 for both. Email or call with any questions. Shop number 505-275-7877

]]> Tools and Shop Equipment: Engine Machining Sun, 19 Apr 2026 20:14:35 GMT 184782170 https://media.racingjunk.com/engine-machining/184782170/sunnen-lb1299-rod-machine-ag300-guage-750-cap-cutter-mandrel.html This is a Good Used Sunnen LB1299 Rod Machine in great shape w/ AG300 Guage. Comes with 4 rod mandrels CR1900, 2100, 2300, 2500 in rack, also comes with short pin mandrels sizes 600, 660, 681, 713, 744, 806, 838, 869, 962 and tall pin / bushing mandrels sizes 720, 780, 840, 900, 960, 1020, 1080, 1140 and 1200 in racks. Some of the mandrels are missing stones/wedges. CRG750 Cap Cutter and Rod Vice are included. Email or call with any questions. Shop # 505-275-7877

]]> Tools and Shop Equipment: Engine Machining Sun, 19 Apr 2026 20:11:19 GMT 184782167 https://media.racingjunk.com/engine-machining/184782167/black-decker-valve-machine-refacer-electric-seat-grinder.html This is a used Black & Decker Super Surface Valve Refacer. It is in good working order, it has been in storage for the last 15 years. Comes with a Electric Valve Seat Grinder, with some pilots and stones. The grinder brand is Thor, which is early Black and Decker, it uses the Black and Decker Stones. Also comes with the diamond stone dresser. Comes with what is pictured, except the cabinet. Does NOT come with the cabinet. Local Pick Up Preferred. Email or call with any questions. Shop #…

]]> Tools and Shop Equipment: Engine Machining Sun, 19 Apr 2026 20:07:19 GMT 184782166 https://media.racingjunk.com/engine-machining/184782166/neway-bench-mount-variable-speed-electric-seat-grinder.html Neway Bench Mount Variable Speed Electric Seat Grinder. This track mounted and will fit any work bench or table. The track is 55 1/2" long. It is currently on a 57" x 26" work bench. I will not ship the work bench but will include the bench with local pickup. Comes with 2 head stands. Does NOT come with any cutters. Cutters are still available from places like Goodson. Email or call with any questions. Shop Number 505-275-7877

]]> Tools and Shop Equipment: Engine Machining Sun, 19 Apr 2026 19:58:33 GMT