This is a complete roots-style blower setup, centered around a Weiand 8-71 supercharger, prepped for a high-performance build. Here's a detailed breakdown of what you're looking at:
Main Blower Assembly
Weiand 8-71 Supercharger (polished) mounted in the center
The casing is clean and polished, showing minimal wear
The front snout houses the drive shaft and supports the pulley system
The rectangular discharge opening underneath feeds into the intake manifold (not currently bolted on
Intake / Injector Hat (Top)
A 3-hole mechanical injector hat (Enderle-style scoop) is mounted on top
Each butterfly valve is visible inside the three circular openings
Red inserts/screens are installed, likely for debris protection or airflow visibility
This setup is typical for mechanical fuel injection systems, not carbureted setups
Designed for aggressive airflow and that classic blower look
Drive System (Front)
Top pulley (mounted on blower snout) and lower crank pulley connected via: 8mm Gilmer-style belt drive system
The belt is currently loosely installed for display/ mock-up
This setup controls boost levels depending on pulley ratio
The large lower pulley suggests a high-drive ratio potential for serious boost
Mounting Plate / Bracket
The blower is sitting on a polished mounting plate / front support bracket
Provides stability when installed on engine
Helps align the blower drive with the crank pulley
